Your phone provides CK3x00 management and settings from the Parrot LCD
screen. Also refer to the Standard
Features section.
Object Push (Sending contacts one-by-one):
Sending
contacts one-by-one to the CK3x00.
Disconnect the phone from
the kit.
Press the central Button
Select the contact you
want to send
Press the OPTIONS menu
Select the SEND BUS. CARD
command
Select via BLUETOOTH
(searching...)
Select your Parrot kit
You can now assign voice
tags. Refer to the Voice
commands Menu.
User-initiated automatic synchronization:
To make it compatible and get your phonebook into the carkit, you need to install a third party software on this phone: Nokia 810 Contact Download application.
How to install this software on your phone ?
You need to install it on your phone with a PC with Bluetooth connectivity (such as a Bluetooth Dongle).
Please follow these steps :
1. Please pair your phone to the car kit and switch off your engine.
2. Launch the bluetooth manager that is provided with the Bluetooth Dongle's software.
3. Find all the bluetooth devices and select your phone.
4. Use the OBEX FILE TRANSFER feature of your phone.
5. Define a Bluetooth PIN code.
6. A window will appear on your phone, enter the same bluetooth PIN code.
7. Send The software you have downloaded to your phone. Don't forget to accept the file transfer on your phone.
8. You will receive a message on your phone. Open it and follow the instructions. Wait until the download is finished.
9. If the installation is succesful you should find an icon with a car and a computer.
Once you have installed the specific software on your phone :
Please make sure your phone is paired to the car kit.
Switch off your car kit.
On your phone go to the MENU screen.
Select the software you have installed : the icon with a car and a computer.
Select the OPTIONS command.
Select OPEN command.
Select the OPTIONS command again.
Select OPEN command.
Then switch on your engine.
Wait until the car kit tell you the end of the synchronization.
You can now assign voice tags. Refer to the voice commands menu.
NOTE:
Make sure the Bluetooth®
option is turned ON.
